ELICOLE LLC  "your family is our concern" TM
Your Subtitle text
Kid-E-Cover Instructions

  Elicole's patented Kid-E-CoverTM offers an innovative solution to deterring younger children from accessing electrical outlets and protecting them from possible injury that may occur. Please keep in mind that this product is not a substitute for appropriate adult supervision, and that at some point in your child's development, they may learn to overcome such deterrents. Always discourage children from playing with or near any electrical equipment. As our parents often told us..."better to be safe than sorry!".

 

INSTALLATION INSTRUCTIONS:

 

  1. Turn off power to the electrical outlet receptacle at the circuit breaker or fuse panel (do not assume that all outlets in one room are on the same circuit). Please keep in mind that electrical outlets wear out. After years of use the outlet will lose its grip, and may pose a hazard. Have a licensed electrician replace the outlet receptacle if it is worn.
  2. Remove existing wallplate.
  3. If access hole in the wall has rough edges, smooth with sandpaper so that the Kid-E-CoverTM will seat flush with wall.
  4. To ensure proper fit of the Kid-E-CoverTM to the electrical outlet receptacle, tighten screws that attach the electrical outlet receptacle to the junction box inside the wall so that the electrical outlet receptacle is mounted flush to the wall.
  5. Place Kid-E-CoverTM over the electrical outlet receptacle and attach with a #6-32 x .75” long screw.
  6. Turn on power to the electrical outlet receptacle.

 

OPERATING INSTRUCTIONS:

 

  1. Pull the tab located on the side of the Kid-E-CoverTM to align the holes of the internal shutter with the holes on the face of the Kid-E-CoverTM.
  2. Insert electrical plug firmly into the electrical outlet receptacle so that the electrical plug is mounted flush the Kid-E-CoverTM and there are no gaps between the Kid-E-CoverTM and the electrical plug.
  3. To remove electrical plug, pull plug firmly. Upon removal, the internal shutter automatically snaps closed to prevent access to the outlet receptacle.

 

 The Kid-E-Cover is manufactured from impact resistant and fire retardant plastic for added safety. DO NOT PAINT the Kid-E-Cover! Painting will interfere with the function of the internal shutters. DO NOT USE THE Kid-E-Cover WITH SPACE HEATERS OR OTHER HIGH AMPERAGE APPLIANCES.  Elicole LLC warranties the Kid-E-Cover against malfunction of the internal shutter system. If the shutter system of the Kid-E-Cover is defective remove the Kid-E-Cover immediately. Please return defective product to Elicole LLC and the defective Kid-E-Cover will be replaced free of charge.